Properties	Product Data						Test Method
	NE-Z130	NE-Z140	NE-Z150	NE-Z160	NE-Z170	NE-Z180
Appearance	White, no obvious extraneous matter.						Visual Inspection
Density,  g/cm3	1.32～1.38	1.37～1.43	1.40～1.46	1.42～1.48	1.45～1.51	1.47～1.53	ASTM D792
Hardness,  Shore A	32±2	40±3	50±3	60±3	70±3	78±3	ASTM D2240
Tensile Strength,  MPa   ≥	3.5	4.5	6.0		5.5		ASTM D412
Elongation at Break,  %  ≥	400		330	280	200	170
Tension Set,  %        ≤	6	8	7		6	5
Tear Strength, Die C  kN/m ≥	12	13	15			13	ASTM D624
Flame Retardancy, 3mm	FV-0						IEC 60695-11-10

Properties	Product Data				Test Method
	NE-Z141	NE-Z151	NE-Z161	NE-Z171
Appearance	White, no obvious extraneous matter.				Visual Inspection
Density,  g/cm3	1.34～1.40	1.38～1.44	1.40～1.46	1.44～1.50	ASTM D792
Hardness,  Shore A	40±3	50±3	60±3	70±3	ASTM D2240
Tensile Strength,  MPa   ≥	5.0	6.0		5.5	ASTM D412
Elongation at Break,  %  ≥	400	350	300	220
Tension Set,  %        ≤	8	7		6
Tear Strength, Die C  kN/m  ≥	13	15		13	ASTM D624
Flame Retardancy, 3mm	FV-0				IEC 60695-11-10

Properties	Product Data				Test Method
	NE-Z250	NE-Z260	NE-Z270	NE-Z280
Appearance	White, no obvious extraneous matter.				Visual Inspection
Density,  g/cm3	1.40～1.46	1.42～1.48	1.45～1.51	1.47～1.53	ASTM D792
Hardness,  Shore A	50±3	60±3	70±3	80±3	ASTM D2240
Tensile Strength,  MPa  ≥	6.0		5.5	4.5	ASTM D412
Elongation at Break,  % ≥	330	280	220	180
Tension Set, %       ≤	12		10
Tear Strength, Die C  kN/m ≥	15			13	ASTM D624
Flame Retardancy, 3mm	FV-0				IEC 60695-11-10

Properties	Product Data					Test Method
	NE-Z540	NE-Z550	NE-Z560	NE-Z570	NE-Z580
Appearance	White, no obvious extraneous matter.					Visual Inspection
Density,  g/cm3	1.37～1.43	1.40～1.46	1.42～1.48	1.45～1.51	1.47～1.53	ASTM D792
Hardness,  Shore A	40±3	50±3	60±3	70±3	78±3	ASTM D2240
Tensile Strength,  MPa  ≥	4.0	5.0				ASTM D412
Elongation at Break,  %   ≥	350	300	250	200	150
Tension Set,  %       ≤	8	7		6	5
Tear Strength, Die C  kN/m ≥	12	14			12	ASTM D624
Flame Retardancy, 3mm	FV-0					IEC60695-11-10