Antistatic Silicone Rubber

Antistatic Silicone Rubber

 

Applications:

●They are specially designed for molded silicone rubber products with requirements for the control of static.

●Physical data in the above table is for reference only.

●Vulcanization condition: 175℃*5Min.

●Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane: 0.65%.

● The Quality Inspection Department obtains the supplied test report with the curing conditions and testing method of the company; due to the difference in curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of the product, instead of a guarantee of the effectiveness or general applicability of our products under a particular application.

Description

PropertiesProduct DataTest Method
NE-1440NE-1450NE-1460NE-1470
AppearanceMilk-white, no extraneous matter.Visual Inspection
Density,  g/cm31.10~1.161.13~1.181.15~1.201.19~1.24ASTM D792
Hardness,  Shore A40±250±260±270±2ASTM D2240
Tensile Strength,  MPa ≥6.07.06.5ASTM D412
Elongation at Break,  %≥450350300200
Tension Set,  %  ≤12
Tear Strength, Die C  kN/m ≥152016ASTM D624
Volume resistivity,  Ω·cm ≤1×1012IEC 60093