| Properties | Product Data | Test Method | ||||||
| NE-1130 | NE-1140 | NE-1150 | NE-1160 | NE-1170 | ||||
| Appearance | Milk-white, no obvious extraneous matter. | VisualInspection | ||||||
| Density, g/cm3 | 1.03～1.13 | 1.08～1.18 | 1.10～1.20 | 1.14～1.24 | 1.17～1.27 | ASTM D792 | ||
| Hardness, Shore A | 30±2 | 40±2 | 50±2 | 60±2 | 70±2 | ASTM D2240 | ||
| Tensile Strength, MPa ≥ | 6.5 | 7.5 | ASTM D412 | |||||
| Elongation at Break, % ≥ | 600 | 500 | 350 | 300 | 220 | |||
| Tension Set, % ≤ | 8 | |||||||
| Tear Strength, Die C kN/m ≥ | 15 | 19 | 22 | 20 | ASTM D624 | |||
| Properties | Product Data | Test Method | ||||
| NE-1230 | NE-1240 | NE-1250 | NE-1260 | NE-1270 | ||
| Appearance | Milk-white, no obvious extraneous matter. | VisualInspection | ||||
| Density, g/cm3 | 1.03～1.11 | 1.09～1.17 | 1.11～1.19 | 1.14～1.22 | 1.18～1.26 | ASTM D792 |
| Hardness, Shore A | 32±2 | 40±2 | 50±2 | 60±2 | 70±2 | ASTM D2240 |
| Tensile Strength, MPa ≥ | 6.5 | 8.0 | 7.5 | ASTM D412 | ||
| Elongation at Break, % ≥ | 700 | 600 | 500 | 400 | 300 | |
| Tension Set, % ≤ | 8 | |||||
| Tear Strength, Die C kN/m ≥ | 20 | 30 | 35 | ASTM D624 | ||
| Properties | Product Data | Test Method | |||||
| NE-1320 | NE-1330 | NE-1340 | NE-1350 | NE-1360 | NE-1370 | ||
| Appearance | Milk-white, no obvious extraneous matter. | VisualInspection | |||||
| Density, g/cm3 | 1.05～1.13 | 1.06～1.13 | 1.10～1.17 | 1.12～1.19 | 1.15～1.22 | 1.17～1.25 | ASTM D792 |
| Hardness, Shore A | 20±2 | 30±2 | 40±2 | 50±2 | 60±2 | 70±2 | ASTM D2240 |
| Tensile Strength, MPa ≥ | 3.0 | 6.0 | 6.5 | 7.0 | ASTM D412 | ||
| Elongation at Break, % ≥ | 700 | 550 | 450 | 350 | 300 | 220 | |
| Tension Set, % ≤ | 8 | ||||||
| Tear Strength, Die C kN/m≥ | 10 | 15 | 19 | 22 | 20 | ASTM D624 | |